Programming MDS-6A Keypads |
|
CEU Credit: NA
|
CEU Course: NA
|
Length: 2 hours
|
Description: This training outlines the procedures and steps required to program the
MCS-2A keypads for use with the MDS-6A music distribution system. This
class explains the process of cloning keypads and other uses for the advanced
features of the MCS-2A keypad.
Course Power Point (7.6 MB file size)
Objective: To equip installers with the skills required to program single use and multiple staged macros on the music systems' keypad(s), as well as demonstrate functionality.
Method of Presentation and Evaluation: Classroom presentation with slides and
actual product. Evaluation is through question and answer period at end of training.
*Florida Cert #0007951 back to top |
|
|
|
Ins and Outs of Cable TV (Using digital alongside analog CATV) |
|
CEU Credit: .2
|
CEU Course: 06-1813*
|
Length: 2 hours
|
Description: With the evolution of TV content into the digital age, installers are hitting new and constant barriers to implementing analog systems in parallel with data services within the home. Data services range from Internet Service Provider (ISP) to Pay Per View (PPV). This creates additional design constraints which should be mitigated during installation of a video distribution system. The training begins with TV and digital theory and ends with direct, application training to successfully combine the best of both analog and digital.
Course Power Point (4.61 MB file size)
Objective: To equip installers with the skills required to install analog RF modulation that can co-exist with content providers' digital content, such as Pay-Per-View and High Definition television (HDTV).
Method of Presentation and Evaluation: Classroom presentation with slides and actual product. Evaluation is through question and answer period at end of training.
*Florida Cert #0007952 back to top |
|
|
|
RF Core Fundamentals - Wiring a home with CoAX |
|
CEU Credit: NA
|
CEU Course: NA
|
Length: NA
|
Description: This is a basic theory and explanation for designing and wiring a RG-59 and RG-6.
Course Power Point (15 KB file size)
Objective: To equip installers with the skills required to install coax cable, amplifiers and distribution systems. It also includes information about analog RF modulation.
Method of Presentation and Evaluation: Classroom presentation with slides and
actual product. Evaluation is through question and answer period at end of training.
back to top |
|
|
|
Troubleshooting RF (CATV) |
|
CEU Credit: NA
|
CEU Course: NA
|
Length: NA
|
Description: This is a quick training program to explain causes for common problems plaguing Coax cable TV systems. Rolling lines, ground loops, snowy channels, thick bars and many other faults are isolated and solved through basic troubleshooting.
Course Power Point (762 KB file size)
Objective: To equip installers with the
skills required to troubleshoot Coax cable networks that exhibit certain
symptoms at the television set(s).
Method of Presentation and Evaluation: Classroom presentation with slides and
actual product. Evaluation is through question and answer period at end of training.
back to top |
|
|
|
AccessBase 2000 Quick Install |
|
CEU Credit: .2
|
CEU Course: 06-1814*
|
Length: 2 hours
|
Description: AB2000 training will enable the installer to more effectively and quickly implement an access control system. The training takes the student from a brand new installation to a small, defined set of conditions which allow a community to control who enters a community's area and when they can enter. This class is great for the new installer, as well as the seasoned pro who is familiar with Linear Access products.
Course Power Point (1.6 MB file size)
*Florida Cert #0007953 back to top |
|
|
|
|
|
|
CEU Credit: .2
|
CEU Course: 07-2123*
|
Length: 2 hours
|
Description: Quick installation and introduction to using AXNET to program access control products. This will get you up and running quickly.
Course Power Point (2.17 MB file size)
Objective: To equip installers with the skills required to install AXNET software on a Windows OS PC and program functionality for users, as well as demonstrate functionality.
Method of Presentation and Evaluation: Classroom presentation with slides and
actual product. Evaluation is through question and answer period at end of training.
*Florida Cert #0007954 back to top |
|
|
|
Introduction to PERS and Step
By Step Programming |
|
CEU Credit: NA
|
CEU Course: NA
|
Length: NA
|
Description: This training is an introduction to the PERS system and has a step by step programming guide to the PERS programming. Although this is written for the PERS2400, the 3600 is very similar with only two additional screens in the programming application.
Course Power Point (13.52 MB file size)
Objective: Train a new user on the features of the PERS. Train the step by step procedures for installing and configuring the PERS system, using the programming application.
Method of Presentation and Evaluation: Classroom presentation with slides and
actual product. Evaluation is through question and answer period at end of training.
back to top |
